1 - 20 of about 24
Measurement of Rake Face Temperature in Cryogenic Machining of Titanium Alloy , Masahiko Sato, Masashi Kamoto , Proceedings of the JSME 2020 Conference on Leading Edge Manufacturing/Materials and Processing , 2020 , There is Review , The Multiple Authorship , English
Measurement of Rake Face Temperature in CO2 Cryogenic Machining of Titanium Alloy , Hikaru BUSSHO, Masahiko SATO , 8th International Conference of Asian Society for Precision Engineering and Nanotechnology , 2019 , There is Review , The Multiple Authorship , English
Roundness in Drilling of Low-Rigidity Workpiece , Masahiko SATO, Akihiro FUKUMA, Kanae YAMAMOTO and Takashi MATSUNO , Key Engineering Materials , 2017 , There is Review , The Multiple Authorship , English
Chip Combustion in High-speed Dry Cutting of Titanium Alloy , Shohei Takemoto, Masahiko Sato, Takashi Matsuno, Kanae Yamamoto , Proceedings of International Conference on Leading Edge Manufacturing in 21st century , 2017 , There is Review , The Multiple Authorship , English
Temperature Variations in Drilling of CFRP/Aluminum and CFRP/Titanium Stacks , Masahiko Sato, Hisataka Tanaka and Kanae Yamamoto , International Journal of Automation Technology , vol.10 (3) (p.348 - 355) , 2016 , There is Review , The Multiple Authorship , English
Experimental Verification of Chatter-Free Ball End Milling Strategy , Lin LU, Masahiko SATO and Hisataka TANAKA , International Journal of Automation Technology , vol.7 (1) (p.45 - 51) , 2013 , There is Review , The Multiple Authorship , English
Measurement of temperature at bottom surface of hole in drilling of CFRP and titanium stack , Masahiko SATO, Tomoyuki AOKI, Hisataka TANAKA, Satoshi TAKEDA , Proceedings of The 7th International Conference on Leading Edge Manufacturing in the 21st Century (p.448 - 451) , 2013 , There is Review , The Multiple Authorship , English
Variation of temperature at the bottom surface of a hole during drilling and its effect on tool wear , Masahiko SATO, Tomoyuki AOKI, Hisataka TANAKA, Satoshi TAKEDA , International Journal of Machine Tools & Manufacture , vol.68 (p.40 - 47) , 2013 , There is Review , The Multiple Authorship , English
Temperature Variation in the Cutting Tool in End Milling , Masahiko SATO, Naoki TAMURA and Hisataka TANAKA , Transaction of the ASME, Journal of Manufacturing Science and Engineering , vol.133 (APRIL) (p.021005-1 - 021005-7) , 2011 , There is Review , The Multiple Authorship , English
Measurement of machined surface temperature in drilling , Masahiko SATO, Hisataka TANAKA and Satoshi TAKEDA , Proceedings of The 6th International Conference on Leading Edge Manufacturing in the 21st Century (p.3384 - ) , 2011 , There is Review , The Simple Work , English
Tool Feed Rate Optimization for Smoothening of Cutting Force in End Milling , Yuji NINOMIYA, Hisataka TANAKA, Masahiko SATO, Susumu OKAMURA and Kazuma TERASHIMA , Journal of Materials and Metallurgy , vol.9 (4) (p.296 - 299) , 2010 , There is Review , The Multiple Authorship , English
Study on Machining Error in Ball End Milling of Spherical Surface , Hisataka TANAKA, Masahiko SATO, Hiroshi YOSHIDA, Satoshi OHTA and Susumu OKAMURA , Key Engineering Materials , vol.407-408 (0) (p.456 - 459) , 2009 , There is Review , The Multiple Authorship , English
Transient Temperature Variation beneath Rake Face in End Milling , Masahiko SATO, Naoki TAMURA and Hisataka TANAKA , Proceedings of The 5th International Conference on Leading Edge Manufacturing in the 21st Century (p.457 - 460) , 2009 , There is Review , The Multiple Authorship , English
Transient Temperature Variation beneath Rake Face in End Milling , Masahiko SATO, Naoki TAMURA and Hisataka TANAKA , Proceedings of The 5th International Conference on Leading Edge Manufacturing in the 21st Century , vol.0 (0) (p.457 - 460) , 2008 , The Multiple Authorship , English
Development of Infrared Radiation Pyrometer with Optical Fibers -- Two-color Pyrometer with Non-contact Fiber Coupker -- , Takashi UEDA, Masahiko SATO, Akira HOSOKAWA and Masahito Ozawa , Annals of the CIRP , vol.57 (1) (p.69 - 72) , 2008 , There is Review , The Multiple Authorship , English
Study on Ball End Milling of Cylindrical Surface (Theoretical Analysis of Machining Error) , Lin LU, Hisataka TANAKA and Masahiko SATO , Proceedings of The 4th International Conference on Leading Edge Manufacturing in the 21st Century , vol.0 (0) (p.445 - 450) , 2007 , The Multiple Authorship , English
An Experimental Technique for the Measurement of Temperature on CBN Tool Face in End Milling , Masahiko SATO, Takashi UEDA and Hisataka TANAKA , International Journal of Machine Tools and Manufacture , vol.47 (14) (p.2071 - 2076) , 2007 , There is Review , The Multiple Authorship , English
Tool Tip Temperatures in End Milling – Application of Infrared Radiation Pyrometer with Optical Fibers , Masahiko SATO and Hisataka TANAKA , Proceedings of The 4th International Conference on Leading Edge Manufacturing in the 21st Century , vol.0 (0) (p.211 - 214) , 2007 , The Multiple Authorship , English
Study on Re-sharpening Technology of Ball End Mills , Hisataka TANAKA, Akira KATO, Naotoshi SUGIYAMA, Katuyo KIMURA and Masahiko SATO , Proceedings of the 8th International Conference on Progress of Machining Technology , vol.0 (0) (p.93 - 96) , 2006 , The Multiple Authorship , English
Measurement of Tool-chip Interface Temperatures in the Diamond Cutting of Difficult-to-cut Materials , Masahiko SATO, Kazutomo MIYAZAKI and Hisataka TANAKA , Proceedings of the 8th International Conference on Progress of Machining Technology , vol.0 (0) (p.293 - 296) , 2006 , The Multiple Authorship , English