1 - 44 of about 44
Delayed fracture stress thresholds degraded by shear punching process in ultra-high-strength steel sheets: Analysis using an in-plane bending test with numerical assimilation , Matsuno, T., Ueda, Y., Takahashi, T., Hama, T., Hojo, T., Shibayama, Y., Ridha, M., Okitsu Y., Takamura, M. , Journal of Manufacturing Process , vol.119 (p.1005 - 1021) , 2024.06 , There is Review , The Multiple Authorship , English
Enhancement of fracture strain during abrupt orthogonal strain- path changes in ferrite/martensite dual phase steel , Matsuno, T., Kinoshita, N., Hokimoto, K., Hama, T., Honda, Y. , Materials Research Proceedings , vol.41 (p.1074 - 1079) , 2024.05 , There is Review , The Multiple Authorship , English
Local yield stress and its unusual independence on multi-axial stress states during Lüders deformation of medium-Mn , Matsuno, T.，Furukawa, K., Okitsu, Y., Koyama, M., Tsuchiyama, T. , ISIJ International , vol.64 (5) (p.859 - 867) , 2024.03 , There is Review , The Multiple Authorship , English
Crystal plasticity finite-element simulation of non-uniform deformation behavior at grain level of ultralow carbon steel , Hama, T., Okamura, M., Nishi, T., Matsuno, T., Hayashi, S., Takada, K., Okitsu, Y. , ISIJ International , vol.64 (3) (p.576 - 586) , 2024.02 , There is Review , The Multiple Authorship , English
Microstructural ductile fracture analysis of 1180-MPa class martensite-matrix dual-phase steel via in situ tensile test , Watanabe, Y., Matsuno, T., Hama, T., Matsuda, T., Okitsu, Y., Hayashi, S., Takada, K., Naito, T. , ISIJ international , vol.64 (1) (p.116 - 125) , 2024.01 , There is Review , The Multiple Authorship , English
Flow stress curves for 980 MPa- and 1.5 GPa-class ultra-high-strength steel sheets weakened under high-stress triaxiality, International Journal of Mechanical Sciences , Matsuno, T., Kondo, D., Hama, T., Naito, T., Okitsu, Y., Hayashi, S., Takada, K. , International Journal of Mechanical Sciences , vol.261 (1) (p.Article ID 108671(16pages) - ) , 2024.01 , There is Review , The Multiple Authorship , English
Unstable stress-triaxiality development and contrasting weakening in two types of high-strength transformation-induced plasticity (TRIP) steels , Matsuno, T., Fujita, T., Matsuda, T., Shibayama, Y., Hojo, T., Watanabe, I. , Journal of Materials Processing Technology , vol.322 (p.Article ID 118174(16 pages) - ) , 2023.12 , There is Review , The Multiple Authorship , English
Microvoid formation of ferrite-martensite dual-phase steel via tensile deformation after severe plastic shear-deformation , Matsuno, T.，Kinoshita, N，Matsuda, T., Honda, Y., Yasutomi, T. , ISIJ international , vol.63 (5) (p.in press - ) , 2023.05 , There is Review , The Multiple Authorship , English
Effect of micro-texture on tensile properties and room-temperature stretch formability of Mg-Al-Zn alloy sheet , Nakata, T., Matsuno, T., Oki, R., Kumada, S. , Journal of Alloys and Compounds , vol.938 (p.Article ID 168519(8pages) - ) , 2023.03 , There is Review , The Multiple Authorship , English
In situ neutron diffraction analysis of microstructural evolution-dependent stress response in austenitic stainless steel under cyclic plastic deformation , Kumagai, M., Kuroda, M., Matsuno, T., Harjo, S., Akita, K. , Materials & Design , vol.221 (p.Article ID: 110965(8pages) - ) , 2022.09 , There is Review , The Multiple Authorship , English
Identification of ductile fracture design curve for hardened quasi-brittle AISI-D2 tool steel to predict shearing tool failure , Matsuno, T, Nakagiri, K, Matsuda, T, Tanaka, T, Yasutomi, T, Shoji, H, Ohata, M , Journal of Materials Processing Technology , vol.307 (p.Article ID: 117680(13pages) - ) , 2022.09 , There is Review , The Multiple Authorship , English
Efficient 3D observation of steel microstructure using serial sectioning with precision cutting and on-site etching , Yamashita, N., Matsuno, T., Maeda, D., Kikuzuki, M., Yokota, H. , Precision Engineering , vol.75 (p.37 - 45) , 2022 , There is Review , The Multiple Authorship , English
Evaluation of fracture strain for cold drawn thin-walled steel tubes via small round-bar tensile test , Matsuno, T, Matsuda, T, Shoji, H, Ohata, M , Metals , vol.12 (p.met12050776((16pages) - ) , 2022 , There is Review , The Multiple Authorship , English
Work hardening and fracture strain evaluation of hardened SKD11 steel using shear punching test , Matsuno, T., Nakagiri, K., Shoji, H., Ohata, M. , Forming the future , 2021.07 , There is Review , The Multiple Authorship , English
Non-uniform deformation behavior of coarse-grained ultralow carbon steel measured using digital Image correlation method , Hama, T, Nishi, T, Oka, M, Matsuno, T, Okitsu, Y, Hayashi, S, Takada, K, Takuda, H , ISIJ inaternational , vol.61 (6) (p.1971 - 1979) , 2021.06 , There is Review , The Multiple Authorship , English
Effects of stress and plastic strain on hydrogen embrittlement fracture of a U-bent martensitic steel sheet , Shibayama, Y., Hojo, T., Koyama, M., Smith, H., Shiro, A., Yasuda, R., Shobu, T., Matsuno, T., Akiyama E. , ISIJ international , vol.61 (4) (p.1322 - 1329) , 2021.04 , There is Review , The Multiple Authorship , English
Analysis of nano-hardness distribution near the ferrite-martensite interface in a dual phase steel with factorization of its scattering behavior , Ando, R, Matsuno, T, Matsuda, T, Yamashita, N, Yokota, H, Goto, K, Watanabe, I , ISIJ international , vol.61 (1) (p.473 - 480) , 2021.01 , There is Review , The Multiple Authorship , English
Tensile deformation behavior of TRIP-aided bainitic ferrite steel in the post-necking strain region , Matsuno, T, Hojo, T, Watanabe, I, Shiro, A, Shobu, T, Kajiwara, K , Science and Technology of Advanced Materials: Methods , vol.1 (1) (p.56 - 74) , 2021 , There is Review , The Multiple Authorship , English
Surface and interior residual stress analysis of a deep-drawn 1180 MPa class ultra-high strength steel sheet with scratch marks , Matsuno, T., Ochiai, Y., Okitsu, Y., Iga, M., Khori, A., Mikami, T. , The International Journal of Advanced Manufacturing Technology , vol.116 (p.2873 - 2884) , 2021 , There is Review , The Multiple Authorship , English
Analysis of preliminary local hardening close to the ferrite and martensite interface in dual-phase steel by a combination of finite element simulation and nano-indentation test , Matsuno, T., Ando, R., Yamashita, N., Yokota, H., Goto, K., Watanabe, I. , International Journal of Mechanical Sciences (p.105663(in press) - ) , 2020 , There is Review , The Multiple Authorship , English
Three-dimensional finite element analysis of representative volume elements for characterizing the effects of martensite elongation and banding on tensile strength of ferrite-martensite dual-phase steels , Matsuno, T, Yoshioka, Y, Watanabe, I, Alves, L , International Journal of Mechanical Sciences , vol.163 (p.105133(15pages) - ) , 2019 , There is Review , The Multiple Authorship , English
Consideration of Three-Dimensional Attitude and Position Control for a Free-Floating Rigid Body Using Three Thrusters , Matsuno, T., Yoshimura, Y., Hokamoto, S , International Journal of Aerospace Engineering , vol.2018 (p.Article ID 2825681(18pages) - ) , 2018.10 , There is Review , The Multiple Authorship , English
Development of the crack-line-update method for two-dimensional piercing simulations , Matsuno, T., Takamura, M., Mihara, S., Koda, T., Tsujioka, K. , Journal of Physics: Conf. Series , vol.1063 (p.012157 - ) , 2018 , There is Review , The Multiple Authorship , English
Fracture-strain Measurement of Steel Sheets under High Hydrostatic Pressure , Matsuno, T., Shoji, H., Ohata, M. , Procedia Manufacturing , vol.15 (p.869 - 876) , 2018 , There is Review , The Multiple Authorship , English
Global Trajectory Design for Position and Attitude Control of an Underactuated Satellite , Yoshimura, Y., Matsuno, T., Hokamoto, S. , Transactions of the Japan Society for Aeronautical and Space Sciences , vol.59 (3) (p.107 - 114) , 2016 , There is Review , The Multiple Authorship , English
Microstructure characterization of fine grains near hot-sheared surface formed during hot-stamping , Matsuno, T., Sekito, Y., Kawasaki, K. , Journal of Materials Processing Technology , vol.229 (p.570 - 581) , 2016 , There is Review , The Multiple Authorship , English
Synergy Effect of Shear Angle and Anisotropic Material Ductility on Hole-Expansion Ratio of High-Strength Steels , Matsuno, T., Sato, K., Okamoto, R., Mizumura, M., Suehiro, M. , Journal of Materials Processing Technology , vol.230 (p.167 - 176) , 2016 , There is Review , The Multiple Authorship , English
Mesoscale Simulation of the Early Evolution of Ductile Fracture in Dual Phase Steels , Matsuno, T., Teodosiu, C., Maeda, D., Uenishi, A. , International Journal of Plasticity , vol.74 (p.17 - 34) , 2015 , There is Review , The Multiple Authorship , English
Void Formation Behavior in Dual Phase Steels of Low Martentsite Volume Fractions , Matsuno, T., Maeda, D., Shuto, H., Uenishi, A. , Proceedings of The 4th International Symposium on Steel Science (p.123 - 126) , 2015 , There is Review , The Multiple Authorship , English
Mesoscale Simulation of The Damage Initiation and Evolution in Dual Phase Steel , Matsuno, T., Teodosiu, C., Maeda, D., Uenishi, A. , Proceedings of International Symposium on Plasticity and Its Current Applications (p.73 - 75) , 2015 , There is Review , The Multiple Authorship , English
Effect of Shearing Clearance and Angle on Stretch-Flange Formability Evaluated by Saddle-Type Forming Test , Matsuno.T., Nitta, J., Sato, K., Mizumura, M., Suehiro, M. , Journal of Materials Processing Technology , vol.223 (p.98 - 104) , 2015 , There is Review , The Multiple Authorship , English
Resistance of hydrogen embrittlement on hot-sheared surface during die-quench process（英文再録） , Matsuno, T., Sekito, Y., Sakurada, E., Suzuki, T., Kawasaki, K., Suehiro, M. , ISIJ International , vol.54 (10) (p.2369 - 2374) , 2014 , There is Review , The Multiple Authorship , English
Geometric conditions of thrusters for 3D attitude control of a free-floating rigid spacecraft , Matsuno, T.,Yoshimura, Y., Hokamoto, S. , Mathematics in Engineering, Science and Aerospace , vol.5 (1) (p.83 - 95) , 2014 , There is Review , The Multiple Authorship , English
Effect of Martensite Volume Fraction on Void Formation Leading to Ductile Fracture in Dual Phase Steels , Matsuno, T., Maeda, D., Shuto, H., Uenishi, A., Suehiro, M. , ISIJ International , vol.54 (4) (p.938 - 944) , 2014 , There is Review , The Multiple Authorship , English
FEM Analysis of High Strength Steel Sheets Up to Fracture and its Application to Piercing Process , Matsuno, T., Seto, A., Suehiro, M., Kuriyama, Y., Murakami, H. , Proceedings of IDDRG2012 (p.134 - 140) , 2012 , There is Review , The Multiple Authorship , English
Evaluation of the Effects of Inclusion Distribution on the Local Ductility of DP Steel , Suwa, Y., Matsuno, T., Hirose, S., Fujita, N., Seto, A. , Materials Science Forum , vol.706-709 (p.1527 - 1532) , 2012 , There is Review , The Multiple Authorship , English
Three Dimensional Attitude Control of an Underactuated Satellite with Thrusters , Yoshimura, Y.,Matsuno, T., Hokamoto, S. , International Journal of Automation Technology , vol.5 (6) (p.892 - 899) , 2011 , There is Review , The Multiple Authorship , English
Position and Attitude Control of an Underactuated Satellite with Constant Thrust , Yoshimura, Y., Matsuno, T., Hokamoto, S. , Proceedings of the AIAA Guidance, Navigation and Control Conference (p.6352 - ) , 2011 , There is Review , The Multiple Authorship , English
Satellite Position and Attitude Control by On-Off Thrusters Considering Mass Change , Yoshimura, Y., Matsuno, T., Hokamoto, S. , Advances in the Astronautical Sciences , vol.142 (p.2971 - 2982) , 2011 , There is Review , The Multiple Authorship , English
3-D Attitude Control of an Underactuated Satellite with Constant Inputs , Yoshimura, Y., Matsuno, T., Hokamoto, S. , Proceedings of the 28th International Symposium on Space Technology and Science (p.2011-d?16 - ) , 2011 , There is Review , The Multiple Authorship , English
Effects of Punch Shape and Clearance on Hole Expansion Ratio and Fatigue Properties in Punching of High Strength Steel Sheets , Matsuno, T., Kuriyama, Y. , Murakami, H., Yonezawa, S., Kanamaru, H. , Steel Research Int., , vol.81 (9) (p.853 - 856) , 2010 , There is Review , The Multiple Authorship , English
Position and attitude control of a planar satellite by two constant force thrusters , Yoshimura, Y., Matsuno, T., Hokamoto, S. , Proceedings of the AIAA/AAS Astrodynamics Specialist Conference , vol.393 (p.18 - 24) , 2010 , There is Review , The Multiple Authorship , English
Three Dimensional Attitude Control of an Underactuated Sate , Yoshimura, Y., Matsuno, T., Hokamoto, S. , Proceedings of the 4th Asia International Symposium on Mechatronics, (p.110 - 115) , 2010 , There is Review , The Multiple Authorship , English
Position and attitude feedback controller of a planar satellite with two thrusters , Matsuno, T., Hokamoto, S. , Proceedings of the ICROS-SICE International Joint Conference (p.4206 - 4211) , 2009 , There is Review , The Multiple Authorship , English
Page: [<<PREV] [1] [NEXT>>]